competitor A

Kit: Several refill products need to be purchased

Step1
Observe thickness of eyelashes and choose roller size
according to length and thickness of eyelashes. These
rollers can also become very sticky.

Step2
Apply glue onto roller, place roller on top of lash line,
apply solution and roll lashes up against roller - not
only can this process get very messy, it offers no
protection between the eye and roller with the solution

Step3
Wait for 20 minutes for Solution 1

Step4
Remove Solution 1 by using a cotton swab and
remover solution. Brush against lash.

Step5
Put on Solution 2 - wait another 20 minutes

Step6
Remove Solution 2 by removing rollers with a
toothpick, peeling each lash (one by one) off
the roller.

TOTAL SERVICE TIME
40-50 Minutes

Kit: The only refill products are the 2 Solution Creams

Step1
One clip size is used for all lengths and thicknesses.

Step2
Snap clips into place and apply solution onto
bottom stage of clips - eyelids are protected and do
not come into contact with solution.

Step3
Wait for 12 minutes for Solution 1

Step4
Slide clips off - all solution wipes off as clips are
slid out

Step5
Apply clean set of clips and apply solution onto bottom stage of clips - wait 4 minutes

Step6
Slide clips off - all solution wipes off as clips are
slid out.

TOTAL SERVICE TIME
16-20 Minutes